BRUSA NLG667 22kW Battery Charger (45…65 Hz mains)

EV Battery Chargers

nlg6The J1772 compliant BRUSA NLG667 is higher output voltage version of the NLG664 – portable water cooled 22kW charger meant to be installed on-board of electric car, bus, truck or a boat. It can also be used in stationary applications such as charging stations.

The unit is CAN controlled only, and primarily designed to be fed from three phase mains with worldwide frequency (45…65 Hz), but will also work from single phase feed with reduced output power. It is very flat (84mm, 3.31″) and comes with default set of mains cables and battery cables fitted with mating connectors. as well as low voltage harness with mating connector. The quick connect coolant fittings (straight or 90′ elbow) are optional but highly recommended for simple and leak-free connection of coolant hoses.

Chargers are manufactured in Switzerland by the most reputable company producing finest EV hardware – BRUSA Elektronik AG.

Manufactured by BRUSA Elektronik AG (Switzerland), 2 years warranty. Distributed and supported in the USA, Canada, Australia and New Zealand exclusively by Metric Mind Corporation.

Manufacturer’s documentation is available here.
NOTE: all downloadable documentation is Copyright © BRUSA Elektronik AG.
Unauthorized redistribution in whole or in parts by the third parties is prohibited.

Ongoing PRICE: see MMC price list.

200...250 VAC
360...440 VAC
30 A rms
32 A rms (each phase)
360...750 VDC
570...750 VDC
11 A
35 A
6.5 kW
20.75 kW
>0.99
+/- 1% of max voltage
>90%
>94%
-20...+80 °C (-4...+176 °F)
Liquid
IP6K9K
504 mm x 352 mm x 84 mm (19.85" x 13.86" x 3.31")
12 kg (26.4 lb)
Open circuit and overtemp protected, outputs of few units can be connected in parallel